WE have a NEW website! Please click HERE to be taken there!
About CutFJ’s Slice Division
At Cut Fine Jewelers, SliceFK focuses on the most exclusive tactical custom knives. Slice is proud to offer some of the most sought-after high-end custom knives available.
*Due to varying finishes from the nature of micarta, the micarta parts in the photo may differ from the ones you receive.*
These WILL NOT be available for international shipping, the shipping costs are just too high and USPS international has a bad track record for us. You will need a US proxy for these, sorry for the inconvenience.
Video to assist with installation can be found below.
READ BELOW BEFORE PURCHASING!! YOU ACCEPT THE FOLLOWING CONDITIONS BELOW IF YOU PURCHASE THIS PRODUCT!!
1) SliceFK and JIKnives ARE NOT RESPONSIBLE FOR DAMAGE CAUSED TO KNIFE WHEN INSTALLING THIS KIT, INSTALL AT YOUR OWN RISK!
2) BY PURCHASING THIS PRODUCT, YOU KNOWINGLY ACCEPT THAT THE MICARTA STUD PATTERN MAY NOT MATCH THE MICARTA SCALES OF YOUR FUSE!
3) NO THESE WILL NOT FIT A CUSTOM KNIFE FROM JIKNIVES.
4) THESE WILL FIT THE LINERLOCK AND FRAMELOCK FUSE VARIANTS.
When removing your titanium thumb studs the blasted finish will become scuffed/scratched. We recommend using this tool (click here) to remove the original titanium studs from the blade. They help to reduce the marring of the finish on the titanium and can be reblasted if you wish to reuse them in the future. SliceFk and JIKnives WILL NOT spa or assist in refinishing any component of the Fuse so please do not ask. If replacement parts are needed after disassembly such as pivots, washers, bearings, etc there will be a $10 plus shipping charger PER component so PLEASE disassemble your knife carefully so as to not damage or lose any parts.
Torx bits used in the video can be found by clicking here.
Pliers used in the video can be found by clickinghere.
Brian Brown Knives Corvus production
BBK-Dama
Regular price
$595.00
Save $-595.00
/
10/06/2023
The time has come! We will be dropping the Damasteel Corvus variant, Zircuti kits, and the remaining stock of the other three variants on Friday, October 13th, at NOON CENTRAL TIME. Photos have been added to the listing for the damasteel variant so be sure to check those out. My email list will be receiving updates as things get closer to the release as well as a reminder the day of the drop so be sure you are on it! Get signed up via the form on SliceFK.com under the main banner!
Specifications and a video of the damasteel variant can be found by scrolling down.
Check out the Zircuti parts kit for the Corvus by clicking HERE.
Blasted titanium (non-inlay)
Blade: 3.25" M390
Scales/Handle: blasted titanium.
OAL: 7.7"
Bolsters: NA
Hardware: PVD coated titanium
Backspacer: PVD coated titanium
Liners: NA
Pivot: custom-designed "pivot island" PVD coated titanium, PVD coated titanium torx screw on slip side with PVD coated titanium collar
Case: branded zipper pouch
Pocket clip: blasted titanium
Weight: 4.1 oz
Condition: Brand new, manufactured by Reate
Arctic Storm inlay
Blade: 3.25" M390
Scales/Handle: blasted titanium with Fat Carbon Crosscut Arctic Storm inlay
OAL: 7.7"
Bolsters: NA
Hardware: satintitanium
Backspacer: anodizedtitanium
Liners: NA
Pivot: custom-designed "pivot island" two-tone finished titanium, blasted titanium torx screw on slip side with anodized titanium collar
Case: branded zipper pouch
Pocket clip: blastedtitanium
Weight: 4.2 oz
Condition: Brand new, manufactured by Reate
White Storm inlay
Blade: 3.25" M390
Scales/Handle:blasted titanium with Fat Carbon Crosscut White Storm inlay
OAL: 7.7"
Bolsters: NA
Hardware:PVD coatedtitanium
Backspacer:PVD coatedtitanium
Liners: NA
Pivot:custom-designed "pivot island" two-tone satin and PVD coated titanium, blasted titanium torx screw on slip side with PVD coated titanium collar
Case: branded zipper pouch
Pocket clip:PDV coatedtitanium
Weight: 4.2 oz
Condition: Brand new, manufactured by Reate
Damasteel with Richlite inlay
Blade: 3.25" Bjorkmans twist Damasteel
Scales/Handle: blasted titanium with Blue Canyon Richlite inlay
OAL: 7.7"
Bolsters: NA
Hardware:PVD coatedtitanium
Backspacer:PVD coatedtitanium
Liners: NA
Pivot: custom-designed "pivot island" two-tone satin and PVD coated titanium, blasted titanium torx screw on slip side with PVD coated titanium collar
Case: branded zipper pouch
Pocket clip:PDV coatedtitanium
Weight: 4.3 oz
Condition: Brand new, manufactured by Reate
Mark your calendar! The Brian Brown Knives and SliceFk Exclusive Corvus release will be on Monday, September 25th at NOON Central time right here! The listing has been updated to reflect the specifics of each variant and we have one more variant that is en route from the factory. This is an actual photo of the Damasteel variant, albeit a bad photo from the factory, that was graciously edited by KnifeForce. Bjorkmans Twist Damasteel with Blue Canyon Richlite inlays, and Black PVD accents and priced at $595. Pricing for the other variants is already shown on the site listing. These will be available during a SECOND Corvus drop, date TBD. We will also be offering Zircuti kits that will also be available during the second drop.
Please take a look at the listing for any questions you might have as they should be answered there. We also have a few of our YouTube buddies who have posted their thoughts on this latest offering, check out the links below! My email list will be receiving updates as things get closer to the release so be sure you are on it! Get signed up via the form on SliceFK.com under the main banner!
Be sure to get signed up for our email list (Click here and fill out the form under the main banner) so you do not miss the details related to the drop!
The three stainless-blade variants will be available for purchase on Monday, September 25th at NOON Central time.
***08/25/2023***
Brian and I have received word from Reate that the knives have shipped from their factory. We expect them to arrive in a few weeks and once we QC them we will be listing them on the website sometime in September. This project and design was originally debuted at Blade Show 2022 and since then the design has been through a few very substantial changes. Most notable will be the handle profile and the "pivot island" on the show side of the handle. The photos shown are of the last round of prototypes and we also have a few additional variants not shown. I will update the listing with finished unit photos of all variants once they arrive here along with the full breakdown of specifications such as blade length, OAL, etc. Brian and I are really excited to finally have this project nearing completion and soon to be in your hands. Thanks everyone for your support and interest so far! Be sure to get signed up for our email list (Click here and fill out the form under the main banner) so you do not miss it.
***06/09/2023***
We are nearing a big announcement regarding this project and we apologize for the delays. The changes made to the final design will be worth it in the end so we thank you so much for your patience. Brian and I hope to make a formal announcement regarding this run by the end of June so please stay tuned. Be sure to get signed up for our email list (Click here and fill out the form under the main banner) so you do not miss it.
***06/22/2022 Update!***
A release date for these has not been set yet. They are listed as "Sold Out" because they have not arrived from the manufacturer. For all updates regarding the release of the Print please sign up for our email list found on the home page, SliceFK.com, using the form found under the main banner.
CMF Metalworks Print production
CMF-PrintFL
Regular price
$395.00
Save $-395.00
/
Framelock:
Blade: 3.1" belt satin M390 on bearings
Scales/Handle: blasted titanium
OAL: 7.6"
Bolsters: NA
Hardware: satin titanium
Backspacer: blasted titanium
Liners: NA
Pivot: blasted titanium
Case: branded zipper pouch
Pocket clip: blasted titanium
Weight: 3.3 oz.
Condition: Brand new, manufactured by Reate
Linerlock:
Blade: 3.1" hand-rubbed satin M390 on bearings
Scales/Handle: black micarta
OAL: 7.6"
Bolsters: NA
Hardware: satin titanium
Backspacer: black micarta
Liners: blasted titanium
Pivot: blasted titanium
Case: branded zipper pouch
Pocket clip: blasted titanium
Weight: 3.3 oz.
Condition: Brand new, manufactured by Reate
Bolsterlock:
Blade: 3.1" hand-rubbed satin M390 on bearings
Scales/Handle: marbled carbon fiber
OAL: 7.6"
Bolsters: blasted titanium (bolster lock only)
Hardware: satin titanium
Backspacer: marbled carbon fiber (not floating)
Liners: blasted titanium
Pivot: blasted titanium
Case: branded zipper pouch
Pocket clip: blasted titanium
Weight: 3.2 oz.
Condition: Brand new, manufactured by Reate
05/19/2023
The release of the CMF Print Production will be Tuesday, May 23rd at NOON Central time. We will send one additional reminder 15 minutes before the drop that day. There are no limits on the quantities you can purchase as several people have asked for all three variants. There is a limited quantity of each variant available and this is the only drop, once they are all sold that is it.
Thanks for your support!
05/18/2023
All Pre-ordered Print production pieces have officially been shipped. We will set a date by tomorrow as to when the remaining variants will be available for sale here on the website. Please stay tuned and sign up for our email list to be among the first to know when they will go up for sale.
04/18/2023
I have been told the knives will be shipping from the factory on April 20th (with the exception of the liner locks and you should have received an email explaining the delay with them if you ordered that configuration. Please watch this video on our Instagram explaining everything.
The knives are nearing completion per an update from Reate and they estimate they will be shipping them to us sometime in March. We will provide an update once we have word that they are in transit. Once they arrive we will perform quality control checks on the whole order and those that preordered will have their knives shipped first. After that is taken care of we will put the remaining knives up for sale here in this listing. There will be announcements made via social media and email announcing when that drop date will be so stayed tuned for more information on the release of the remaining knives. Thanks to everyone for their support and patience so far, we are almost there!
08/12/2022
The knives are officially on order. Once we have a more firm delivery date from Reate we will update everyone. Any time we receive any additional updates from Reate we will also post that here. Thanks to each and every one of you for your support!
08/05/2022
The preorder is officially closed and we want to thank each and every one of you for your support. We will be submitting the order to Reate next week. Please check back here in the description of the listing for any updates, we will keep you informed with any information we receive during manufacturing.
READING the description below is absolutely CRITICAL. We will not be held responsible if you did not take the time to read it and need to change something on your order.
***07/28/2022***
PLEASE READ THE INFORMATION BELOW IN ITS ENTIRETY. SUBMITTING AN ORDER MEANS YOU HAVE AGREED TO THE TERMS BELOW. ABSOLUTELY NO EXCEPTIONS.
PLEASE NOTE, THE LINER LOCK WILL NOT HAVE A BLACK COATED BLADE/LINERS/BACKSPACER/HARDWARE/OR POCKET CLIP AS SHOWN IN THE PHOTOS. IT WILL HAVE BLACK MICARTA SCALES/BACKSPACER AND A BELT SATIN FINISHED BLADE. PLEASE READ THE TABLE OF DESCRIPTIONS BELOW TO UNDERSTAND WHAT THE SPECIFICATIONS ARE FOR THE VARIATION YOU ARE ORDERING.
The preorder for the CMF Metalworks Print Production will be done over TWO drops. The first will be Tuesday, August 2nd from 7 PM to 9 PM Central time and the second will be Friday, August 5th from 12 PM to 2 PM Central time. There will be some additional units available but we do not have an estimated quantity or guarantee you will be able to purchase one outside of this preorder. The listing, knife specifications, videos, and variations can all be found below. We will send one additional reminder via email 15 minutes before the drop each day. You can sign up for the email reminder on the home page, SliceFK.com, using the form found under the main banner. There are no limits to the number of knives you can order but there will be ABSOLUTELY NO REFUNDS until after the knives have arrived. See our full refund policy here). Past projects have arrived in 8 to 9 months so we are planning for a timeframe of about that long before they will ship to us. This is not a guarantee nor are we saying that will be the case, it may be faster or it may take longer. Please do not message or email Ian or myself asking for an update, we will post any and all updates in this description (similar to the one you are reading now), send out an email to the list, and post to our social media channels.
Ian and I are exceptionally grateful for your support of this project!
***05/19/2022 Update!***
A release date for these has not been set yet. They are listed as "Sold Out" because they have not arrived from the manufacturer. For all updates regarding the release of the Print please sign up for our email list found on the home page, SliceFK.com, using the form found under the main banner.
