SliceFK Production Exclusives

*Due to varying finishes from the nature of ziructi, the zircuti parts in the photo may differ from the ones you receive.* This kit contains one pivot collar, one pivot island, one backspacer, and one pocket clip. Your original factory hardware will be reused.

Check out the Brian Brown Corvus by clicking HERE.

READ BELOW BEFORE PURCHASING!! YOU ACCEPT THE FOLLOWING CONDITIONS BELOW IF YOU PURCHASE THIS PRODUCT!!

1) SliceFK and Brian Brown Knives ARE NOT RESPONSIBLE FOR DAMAGE CAUSED TO KNIFE WHEN INSTALLING THIS KIT, INSTALL AT YOUR OWN RISK! 

2) BY PURCHASING THIS PRODUCT, YOU KNOWINGLY ACCEPT THAT THE BACKSPACER, PIVOT COLLAR, POCKET CLIP COLORING, AND/OR PATTERN MAY NOT MATCH! 

3) There is a pin in the original backspacer of your Corvus, it may or may NOT be able to be reused on the Zircuti backspacer depending on the tolerances of the pin and the new Zircuti backspacer.

4) NO THESE WILL NOT FIT A CUSTOM KNIFE FROM BRIAN BROWN.

5) THESE WILL FIT ALL CORVUS VARIANTS.

If replacement parts are needed after disassembly such as pivots, washers, bearings, etc those replacement parts can be found on Brian Brown's website by clicking HERE. PLEASE disassemble your knife carefully so as to not damage or lose any parts as there will be a charge for all replacement parts.

10/06/2023

The time has come! We will be dropping the Damasteel Corvus variant, Zircuti kits, and the remaining stock of the other three variants on Friday, October 13th, at NOON CENTRAL TIME. Photos have been added to the listing for the damasteel variant so be sure to check those out.  My email list will be receiving updates as things get closer to the release as well as a reminder the day of the drop so be sure you are on it! Get signed up via the form on SliceFK.com under the main banner!

 Specifications and a video of the damasteel variant can be found by scrolling down.

Check out the Zircuti parts kit for the Corvus by clicking HERE.

Blasted titanium (non-inlay)

Arctic Storm inlay

White Storm inlay

Damasteel with Richlite inlay

Mark your calendar! The Brian Brown Knives and SliceFk Exclusive Corvus release will be on Monday, September 25th at NOON Central time right here! The listing has been updated to reflect the specifics of each variant and we have one more variant that is en route from the factory. This is an actual photo of the Damasteel variant, albeit a bad photo from the factory, that was graciously edited by KnifeForce. Bjorkmans Twist Damasteel with Blue Canyon Richlite inlays, and Black PVD accents and priced at $595. Pricing for the other variants is already shown on the site listing. These will be available during a SECOND Corvus drop, date TBD. We will also be offering Zircuti kits that will also be available during the second drop.

Please take a look at the listing for any questions you might have as they should be answered there. We also have a few of our YouTube buddies who have posted their thoughts on this latest offering, check out the links below! My email list will be receiving updates as things get closer to the release so be sure you are on it! Get signed up via the form on SliceFK.com under the main banner!

 https://youtu.be/hkUj41CoHcs?si=8YLcNrJi5P9bv90C

https://youtu.be/YUBhXsnOfX4?si=uQG7JCQj2dEEZzRL

Be sure to get signed up for our email list (Click here and fill out the form under the main banner) so you do not miss the details related to the drop!

The three stainless-blade variants will be available for purchase on Monday, September 25th at NOON Central time. 

 ***08/25/2023***

 Brian and I have received word from Reate that the knives have shipped from their factory. We expect them to arrive in a few weeks and once we QC them we will be listing them on the website sometime in September. This project and design was originally debuted at Blade Show 2022 and since then the design has been through a few very substantial changes. Most notable will be the handle profile and the "pivot island"  on the show side of the handle. The photos shown are of the last round of prototypes and we also have a few additional variants not shown. I will update the listing with finished unit photos of all variants once they arrive here along with the full breakdown of specifications such as blade length, OAL, etc. Brian and I are really excited to finally have this project nearing completion and soon to be in your hands. Thanks everyone for your support and interest so far! Be sure to get signed up for our email list (Click here and fill out the form under the main banner) so you do not miss it.

***06/09/2023***

We are nearing a big announcement regarding this project and we apologize for the delays. The changes made to the final design will be worth it in the end so we thank you so much for your patience. Brian and I hope to make a formal announcement regarding this run by the end of June so please stay tuned. Be sure to get signed up for our email list (Click here and fill out the form under the main banner) so you do not miss it.

***06/22/2022 Update!***

A release date for these has not been set yet. They are listed as "Sold Out" because they have not arrived from the manufacturer. For all updates regarding the release of the Print please sign up for our email list found on the home page, SliceFK.com, using the form found under the main banner.